By Tetsuya Yokoyama •
January 30, 2009
Editor’s Note: This is part three of an interview Tetsuya Yokoyama recently had the opportunity to conduct with Honda R&D Chief Engineer, Mr. Yamamoto, at Eco-Products 2008 in Tokyo, Japan. Mr. Yamamoto is greatly involved in the development of Honda’s hybrid technology including the upcoming 2009 Insight. Read part one here and part two here.
Honda CR-Z lightweight hybrid sports car. Photo: Honda
After talking with Mr. Yamamoto about supercapacitors, I moved on to discuss the possibility of a manual transmission on future hybrid vehicles. He said that it would not be difficult to put a manual transmission into an Integrated Motor Assist (IMA) Hybrid system.
Even though the current Civic hybrids have no option for a manual transmission, a manual transmission was offered on the first generation of that car. The reason the current Civic Hybrid has a continuously variable transmission (CVT) is to increase overall fuel efficiency by automatically letting the system choose the most efficient drive ratio.
While you could potentially get a much better fuel efficiency with a manual transmission if you practice “Ecodriving,” the efficiency would go down significantly if you choose lower gears more often or drove more aggressively.
By Tetsuya Yokoyama •
January 1, 2009
Editor’s Note: This is part two of an interview Tetsuya Yokoyama recently had the opportunity to conduct with Honda R&D Chief Engineer, Mr. Yamamoto, at Eco-Products 2008 in Tokyo, Japan. You can read part one here. Mr. Yamamoto is greatly involved in the development of Honda’s hybrid technology including the upcoming 2009 Insight.
As I mentioned in part one of my interview, Honda first introduced the ultracapacitor with the J-VX concept. The J-VX ultimately led to the original production Insight, without the ultracapacitor. Honda also used the ultracapacitor technology on the FCX models (pre-Clarity) for years.
Honda developed their original ultracapacitors, and improved them during the period of FCX development and explains more about it on their web site.
By Tetsuya Yokoyama •
December 23, 2008
Editor’s Note: This is the part one of an interview Tetsuya Yokoyama recently had the opportunity to conduct with Honda R&D Chief Engineer, Mr. Yamamoto at Eco-Products 2008 in Tokyo, Japan. Mr. Yamamoto is greatly involved in the development of Honda’s hybrid technology including the upcoming 2009 Insight.
I’d like to thank all the readers who responded to my previous article with questions I could pose to Mr. Yamamoto. I’d also like to thank InsightCentral.net members for responding to that article too! I really appreciate your input, and apologize for taking so long to write this article.
After talking a bit about Green Options Media, Gas 2.0 and Insight Central, the very first question I asked him was about the possibility of using an ultracapacitor in a future Honda hybrid. More than ten years ago, the Integrated Motor Assist (IMA) power train was first introduced with the J-VX concept and was originally developed with an ultracapacitor instead of NiMH batteries.
Mr. Yamamoto explained that Honda engineers have researched ultracapacitor technology in the past but that the technology, although promising, is still too new and has several challenges to overcome. In the end, Honda decided to go with NiMH batteries on the first generation of Insight in consideration of mass production and quality control.
By Tetsuya Yokoyama •
December 11, 2008
I will have the opportunity to interview Honda Chief Engineer Mr. Yoshio Yamamoto this Saturday. If you have any questions about Honda’s hybrid cars, post them below!
I met Mr. Yamamoto today while visiting the Honda booth at the Eco-Products 2008 Exhibition. Displayed was the new Honda Insight concept, which is close to the production model. I loved driving my 2000 Honda Insight and am excited about the next generation. Mr. Yamamoto and Assistant Product Manager Mr. Hatano were happy to hear from a former first generation Insight owner.
